System:cpon, System:cpon -46 – Agilent Technologies B2201A User Manual
Page 172
5-46
Agilent B2200 User’s Guide, Edition 2
SCPI Command Reference
:SYSTem:CPON
:SYSTem:CPON
This command resets the specified card. Status after this command is shown below:
Channel Configuration:
Not changed.
Connection Rule:
Free
Connection Sequence:
Break Before Make
Bias Mode:
Off
Bias Input Port:
10
Bias-enabled Channels:
All channels (output ports) are bias-enabled.
Couple Mode:
Off
Couple Input Port:
Cleared.
Ground Mode:
Off
Ground Input Port:
12
Ground-enabled Channels:
Cleared.
Ground-enabled Ports:
Cleared.
Card Channel Status:
All relays are opened.
Self-Test Result:
Not changed.
Input Port Symbol String:
Not changed.
Output Port Symbol String:
Cleared.
For the device reset state, see *RST.
Syntax
:SYSTem:CPON card_number
Example
OUTPUT @Agb2200;":SYST:CPON ALL"
Parameter Explanation
card_number
For Auto Config mode: 0 or ALL
For Normal Config mode: 1, 2, 3, 4, or ALL