Agilent Technologies B2201A - Manual (Page 148)

5-22 Agilent B2200 User’s Guide, Edition 2
SCPI Command Reference
:DIAGnostic:TEST:CARD:STATe?
:DIAGnostic:TEST:CARD:STATe?
This command returns the most recent relay test result for the specified card.
Syntax :DIAGnostic:TEST:CARD:STATe? card_number
Query response test_result <^END>
1: fail
0: pass
-1: not tested
Example OUTPUT @Agb2200;":DIAG:TEST:CARD:STAT? 1"
ENTER @Agb2200;A
:DIAGnostic:TEST:FRAMe:CLEar
This command clears test result of the specified B2200 test.
Syntax :DIAGnostic:TEST:FRAMe:CLEar CONTroller | FPANel | LED |
PEN | BEEPer
Example OUTPUT @Agb2200;":DIAG:TEST:FRAM:CLE CONT"
Parameter Explanation
card_number card number: 1, 2, 3, 4
Parameter Explanation
CONTroller Controller test
FPANel Front panel interface test
LED LED matrix test
PEN Light pen test
BEEPer Beeper test