Driver functions, Driver functions -5 – Agilent Technologies B2201A User Manual
Page 191
Agilent B2200 User’s Guide, Edition 2
6-5
VXI plug&play Driver
Driver Functions
Driver Functions
Table 6-1 lists all the functions for the Agilent B2200. You will see a brief
description of the functions in the table.
For the description, syntax and parameters of the function, refer to the reference
section following this table. The driver functions in the reference section will appear
in the alphabetical order.
Table 6-1
Agilent B2200 Driver Function Lists
Category Function
Description
Miscellaneous agb220xa_init
Initializes the B2200.
Closes the connection with the B2200.
Executes the B2200 reset.
Executes the B2200 self-test.
Queries for the B2200 error code/message.
Queries for the driver error.
Queries for the B2200 firmware/driver revisions.
Sets the timeout.
Queries for the timeout setting.
Sets the automatic error checking.
agb220xa_errorQueryDetect_Q Queries for the automatic error checking setting.
agb220xa_dcl
Sends the Device Clear.
Queries for the ESR status.
Reads the B2200 status byte.
Checks the B2200 operation completion status.
Mode Control agb220xa_func
Sets the configuration mode.
Sets the connection rule/sequence.
Couple Mode agb220xa_couplePort
Selects the couple ports of the specified card.
Sets the couple mode ON or OFF for the specified card.
Detects and sets the couple ports for all cards.
Bias Mode
Selects the input bias port of the specified card.
Bias-enables all output ports of the specified card.
Bias-enables all output ports of the specified channel list.
Sets the bias mode ON or OFF for the specified card.
Queries for the bias channel list.