Route]:open[:list, Route]:open[:list] -41 – Agilent Technologies B2201A User Manual

Page 167

Agilent B2200 User’s Guide, Edition 2

5-41

SCPI Command Reference

[:ROUTe]:OPEN[:LIST]

[:ROUTe]:OPEN[:LIST]

This command disconnects the input ports from output ports as specified in
channel_list. The query returns 0 or 1 for each channel specified by channel_list, in
same order as specified by channel_list.

For some modes (such as Single Route Mode, Couple Mode, Ground Mode, and
Bias Mode), more complex disconnections may occur.

Syntax

[:ROUTe]:OPEN[:LIST] (@channel_list)

[:ROUTe]:OPEN[:LIST]? (@channel_list)

Query response

open_status{, open_status} <^END>

1 : opened
0 : closed

Example

OUTPUT @Agb2200;":ROUT:OPEN:CARD ALL"

OUTPUT @Agb2200;":ROUT:CLOS (@10101,10202)"

OUTPUT @Agb2200;":ROUT:OPEN? (@10101,10102,10201,10202)"

ENTER @Agb2200;A$
In this example, A$ will be 0,1,1,0.

Parameter Explanation

channel_list

Channels to open (disconnect) or to check.
For channel_list, see “Switch Control” on page 4-5.

This manual is related to the following products:

B2200A