Agilent Technologies B2201A - Manual (Page 228)

7-8 Agilent B2200 User’s Guide, Edition 2
Error Messages
Standard SCPI Error Messages
Device-Dependent Errors
-3XX errors indicate that an B2200 operation did not properly complete, possibly
due to an abnormal hardware or firmware condition. These negative codes are SCPI
defined. For the device-dependent positive error codes, see “B2200 Specific Error
Messages” on page 7-10. The positive codes are not SCPI defined.
For these errors, an error number and message are placed in the error queue, and bit3
of the Standard Event Status Register is set.
Error
Number
Error Message and Description
-300 Device-specific error
Generic device-dependent error for the B2200 that cannot be
determined more specifically.
-311 Memory error
An error was detected in the B2200's memory.
-350 Queue overflow
If error queue is full, this code is entered into the error queue instead
of the code that caused the error. This code indicates that there was
no room in the error queue, so an error occurred but was not
recorded.