Setup menus, Setup menu, Setup menus -30 – Agilent Technologies B2201A User Manual
Page 90: Setup menu -30
3-30
Agilent B2200 User’s Guide, Edition 2
Front Panel Operation
Setup Menus
Setup Menus
This section explains the following setup menus displayed by pressing the
Menu
key
or
Selftest
key.
•
•
Setup Menu
Press the
Menu
key. The setup menu will be displayed on the LCD as shown in the
following example. The setup menu is used to change the GPIB address, detect the
couple port automatically, and so on.
Press the arrow key to move the cursor to the desired function name. Then, press the
Enter
key. The setup message or the sub menu will be displayed. To return to the
previous menu, press the
Exit
key.
[Hardware Configuration]
CONFIG SCAN
ERROR
RMT_DSPL
BEEP >
[Hardware Configuration]
RMT_DSPL BEEP PEN
This manual is related to the following products: