Rst -9 – Agilent Technologies B2201A User Manual
Page 135
Agilent B2200 User’s Guide, Edition 2
5-9
SCPI Command Reference
*RST
*RST
This command performs an instrument reset. Status after *RST is shown below:
Channel Configuration:
Auto configuration mode
Connection Rule:
Free
Connection Sequence:
Break Before Make
Bias Mode:
Off
Bias Input Port:
10
Bias-enabled Channels:
All channels (output ports) are bias-enabled.
Couple Mode:
Off
Couple Input Port:
Cleared.
Ground Mode:
Off
Ground Input Port:
12
Ground-enabled Channels:
Cleared.
Ground-enabled Ports:
Cleared.
Card Channel Status:
All relays are opened.
Self-Test Result:
Not changed.
Input Port Symbol String:
Cleared.
Output Port Symbol String:
Cleared.
Beeper:
On
LCD in remote mode:
Off
LED in remote mode:
On
Light Pen:
Enabled.
Syntax
*RST
Example
OUTPUT @Agb2200;"*RST"
NOTE
This command does not change the self-test result.
For the power-on settings, see :SYSTem:CPON.