Agilent Technologies Agilent 4396B - Manual (Page 62)

Setting the Frequency Range
T o display the transmission characteristics of the 70 MHz bandpass
lter , you should specify the frequency range for the measurement.
In this example , set the analyzer to a 70 MHz center frequency with a
500 kHz span.
In the SWEEP block, press 4 Center 5 . Press 4 7 5 4 0 5 .
Press 4 M/ 5 . In the SWEEP block, press 4 Span 5 .
Press 4 5 5 4 0 5 4 0 5 . Press 4 k/m 5 .
3-8 Network Analyzer T our