ADS Technologies Wireless Cable Modem Gateway SBG1000 - Manual (Page 93)

87 SBG1000 User Guide
Home
X
Exit Print
Overview Installation Troubleshooting Contact FAQ Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless Print Server USB
Printer > CONFIGURATION — Apple Page
Use this page to configure the print server for AppleTalk printing:
Printer > CONFIGURATION — Apple page fields
Field Description
AppleTalk Zone Sets the AppleTalk zone having access to the print server. The zone name can be up to 32
characters long. The default “*” enables all AppleTalk zones to use the printer(s) connected to
the print server.
Printer Type Sets the printer type. The default, LaserWriter, is used for most AppleTalk printers. If you have
an Epson printer that supports AppleTalk, it has a different printer type, found in the Epson
printer manual or web site. The
SBG1000 print server only responds to the Chooser if the
AppleTalk zone and printer type are the same.
Communication Protocol Standard - if the printer uses a communication protocol that supports sending and receiving
ASCII data. The Standard protocol is typically supported on devices using RS-232 and
centronics channels. The default is ASCII.
Binary Communication Protocol (BCP) - if the printer can send and receive binary data. BCP is
used by some devices for flow control, status request, abort job, and end of file functions. BCP
can provide a significant performance advantage over ASCII printing on serial and parallel
ports.
Tagged Binary Communication Protocol (TBCP) - for a printer containing a
language-independent feature to determine which language interprets a print job. TBCP is
typically supported by PJL printers.
To determine the protocol a printer supports, see the documentation provided with the printer.
Apply Click to apply your changes.