ADS Technologies Wireless Cable Modem Gateway SBG1000 - Manual (Page 18)

12 SBG1000 User Guide
Home
X
Exit Print
Overview Installation Troubleshooting Contact FAQ Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless Print Server USB
Wired Ethernet LAN
Each computer on the 10/100Base-T Ethernet LAN requires an Ethernet network interface card ( NIC ) and driver
software installed.
Because the SBG1000 Ethernet ports support auto-MDIX , you can use straight-through or cross-over cable to
connect a hub, switch, or computer. Use category 5 cabling for all Ethernet connections.
The physical wiring arrangement has no connection to the logical network allocation of IP addresses.
Sample Ethernet to computer connections
Coaxial cable
Category 5 Ethernet cable