ADS Technologies Wireless Cable Modem Gateway SBG1000 - Manual (Page 37)

31 SBG1000 User Guide
Home
X
Exit Print
Overview Installation Troubleshooting Contact FAQ Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless Print Server USB
Basic Configuration
The following sections provide information about basic SBG1000 configuration:
•
Starting the SBG1000 Setup Program
•
Changing the Default Password
•
Enabling Remote Access
•
Setting the Firewall Policy
•
Gaming Configuration Guidelines
For more advanced configuration information, see “ Configuring TCP/IP ”, “ Setting Up the Wireless LAN ”,
“ Configuring the Print Server ”, or “ Setting Up a USB Driver ”.
For normal operation, you do not need to change most default settings. The following caution statements
summarize the issues you must be aware of:
Caution!
To prevent unauthorized configuration, change the default password immediately when you first
configure the SBG1000. See “
Changing the Default Password ”.
Firewalls are not foolproof. Choose the most secure firewall policy you can. See “ Setting the Firewall
Policy ”.
If you are using a wired LAN only and have no wireless clients, be sure you disable the wireless
interface by turning off Enable Wireless Interface on the
Wireless > NETWORK Page .
For a wireless LAN only, be sure you follow the instructions in “ Setting Up the Wireless LAN ”.