ADS Technologies Wireless Cable Modem Gateway SBG1000 User Manual
Page 43

37
SBG1000 User Guide
X
Exit
Overview Installation Troubleshooting Contact
FAQ Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless Print Server USB
5
Click Apply to apply your changes.
If you have the need, you can:
•
View the rules for the High, Medium, or Low predefined policy templates or create a custom policy on the
Firewall > POLICY — advanced Page
•
Configure a firewall alert on
and
•
View the firewall logs on the
For information about how the firewall can affect gaming, see “
Gaming Configuration Guidelines
The predefined policies provide outbound Internet access for computers on the SBG1000 LAN. The SBG1000
firewall uses
to allow inbound responses when there already is an outbound session running
corresponding to the data flow. For example, if you use a web browser, outbound HTTP connections are permitted
on port 80. Inbound responses from the Internet are allowed because an outbound session is established.
When required, you can configure the SBG1000 firewall to allow inbound packets without first establishing an
outbound session. You also need to configure a port forwarding entry on the
or a DMZ client on the
Gateway > LAN — nat config Page
.
After you edit some fields and click Apply, you are warned that you must reboot for your change to take effect.
Rebooting takes 10 to 15 seconds. After rebooting, you must log-in again.