ADS Technologies Wireless Cable Modem Gateway SBG1000 - Manual (Page 39)

33 SBG1000 User Guide
Home
X
Exit Print
Overview Installation Troubleshooting Contact FAQ Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless Print Server USB
5 Click Log In to display the SBG1000 user configuration and status windows:
If you have difficulty starting the SBG1000 Setup Program, see “ Troubleshooting ” for information.
Router is a configuration option that may appear on your window but may not be supported.
Click To Perform
Cable Configure and monitor the cable system connection.
Gateway Configure and monitor the gateway preferences (see Configuring the Gateway ).
Wireless Configure and monitor the wireless interface (see “ Setting Up the Wireless LAN ”).
Firewall Configure and monitor the firewall (see “ Setting the Firewall Policy ”).
Printer Configure the print server (see “ Configuring the Print Server ”).
Admin Changing the Default Password .
Info Display information about the SBG1000 Setup Program.
Reboot Restart the SBG1000. It is the same as pressing the reset button on the rear panel for less than five seconds.
Log Out Log out of the SBG1000.
After you edit some fields and click Apply, you are warned that you must reboot for your change to take effect.
Rebooting takes 10 to 15 seconds. After rebooting, you must log-in again.