ADS Technologies Wireless Cable Modem Gateway SBG1000 - Manual (Page 78)

72 SBG1000 User Guide
Home
X
Exit Print
Overview Installation Troubleshooting Contact FAQ Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless Print Server USB
Configuring the Wireless Network Name on the SBG1000
If you enable Closed Network on the SBG1000 Wireless > SECURITY — advanced Page , you must configure the
same network name ( ESSID ) on all wireless LAN clients (stations). Never provide the ESSID to anyone who is not
authorized to use your wireless LAN.
To configure the ESSID:
1 Start the SBG1000 Setup Program as described in “ Starting the SBG1000 Setup Program ”.
2 On the left frame, click Wireless.
3 Click the NETWORK tab to display:
4 In the ESSID field, type a unique name. It can be any alphanumeric, case-sensitive string up to
32 characters. The default is “Motorola.” Do not use the default ESSID.
5 Click Save Changes to save your changes.
6 To restrict wireless LAN access to clients configured with the same Network Name (ESSID) as the SBG1000,
click the SECURITY tab.