Setting up a usb driver in windows98, Setting up a usb driver in windows 98 – ADS Technologies Wireless Cable Modem Gateway SBG1000 User Manual
Page 115

SBG1000 User Guide
X
Exit
Overview Installation Troubleshooting Contact
FAQ Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless Print Server USB
Setting Up a USB Driver in Windows 98
1
Insert the SBG1000 Installation CD-ROM in the CD-ROM drive. This CD contains the USB drivers and must
be inserted and read by the PC before you connect the SBG1000 to the PC.
2
Connect the USB cable as shown in
.
A few seconds after you complete the USB connection, the Add New Hardware Wizard window is displayed:
3
Click Next. The following window is displayed:
4
Be sure “Search for the best driver for your device” is selected.