Connecting a pc to the usb port, Connecting the printer, Caution – ADS Technologies Wireless Cable Modem Gateway SBG1000 User Manual
Page 31
25
SBG1000 User Guide
X
Exit
Overview Installation Troubleshooting Contact
FAQ Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless Print Server USB
Connecting a PC to the USB Port
You can connect a single PC running Windows 98, Windows XP, Windows Me, or Windows 2000 to the SBG1000
USB port.
To connect a PC to the USB port:
1
Insert the SBG1000 Installation CD-ROM in the CD-ROM drive.
2
Connect the USB cable to the USB port on the SBG1000.
3
Connect the other end to the USB port on the computer.
4
Install the USB driver following the appropriate procedure for “
Connecting the Printer
Connect the printer to the Motorola SURFboard Wireless Cable Modem Gateway printer port. If a cable was
supplied with the printer, use that cable. Consult your printer documentation to determine cabling requirements
from the SBG1000 to the printer.
After connecting the printer, power it on and follow the instructions for “
Caution!
Before plugging in the USB cable, be sure the SBG1000 Installation CD-ROM is inserted in the PC
CD-ROM drive.