HID DTC1000/4000/4500 User Guide LINUX & MAC - Manual (Page 46)

© 2011 HID Global Corporation All rights reserved
Fargo DTC1000/DTC4000/DTC4500 CUPS Driver User Guide - LINUX (L001452, Rev 1.2) 46
Reviewing the Lamination Position and Speed
Command Line Usage CUPS Options Description
LamAutoDetect = true/false AutoDetectLaminate
= True/ False Enables auto detection of
Laminate.
LamPosition = <-100 to +100> Horizontal Offset = <
-100 to +100> Horizontal Offset:
To move the overlaminate
more toward the card output
side of the Printer, enter a
negative number
LamSpeed= < 8 to 55> Dwell Time (sec/in)=
<0.8 to 5.5> Dwell Time:
Controls the throughput
speed of the cards. The
range of this parameter is
from 0.8s to 5.5s. The
command line parameter is
Multiplied by 10.
Reviewing the Lamination Side
Command Line Usage CUPS Options Description
LamSide = None Lamination Side = None No Lamination will be
done.
LamSide = FrontSide Lamination Side = Front Only front of card will be
laminated.
LamSide = BackSide Lamination Side = Back Only back of card will be
laminated.
LamSide = BothSides Lamination Side = Both Both sides of card will be
laminated.
LamSide = OppositeSides Lamination Side =
Opposite Will flip the card again
before laminating.