Hubbardton Forge 344935 - Manual (Page 2)

Assembly & Installation Instructions
G11
For Post-Mounted 34-4935 Page 2 of 4
Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735 22748
To Assemble Glass
(Figure 2)
Component Parts
K Glass
L Bracket
M Flat Head Screws (3)
1. Install bracket (L) inside glass (K) with tabs pointing up.
2. Thread three flat head screws (M) into the bracket (L) and tighten.
Be careful not to over tighten.
To Install Glass (Figures 3 thru 6)
Component Parts
H Fixture
J Fixture
Cover
K Glass
L Bracket
N Knurl Ball (3)
O Screws
(3)
P Leveling Screws (3)
Q 8-32 Screw
R Fixture Tab
S Locking Tab
1. Install bulb.
2. Slip glass (K) onto fixture (H) aligning slots in bracket (L) with studs
installed in fixture (H).
3. Align bracket (L) so screws (O) installed slip through the holes in
fixture (H).
4. Install knurl balls (N).
5. Level the glass (K) by turning the three leveling screws (P) (Figure 4).
6. Raise the fixture cover (J) past the three fixture tabs (R) on the fixture
(H). Turn aligning the fixture cover tabs (S) with the fixture tabs and
lower until they engage. See Figure 5
7. Restore electricity at main breaker.
(continued)
(Figure 2)
(Figure 3)