Hubbardton Forge 307861 - Manual (Page 2)

Installation Instructions
B142
For Medium and Large After Hours Outdoor 30-7860, 30-7860F, 30-7861 & 30-7861F Page 2 of 2
Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735 21193
4. Apply a generous bead of a suitable caulking material to caulking lip (I)
on the fixture (Figure 3).
5. Carefully tuck all wires behind the fixture, place fixture firmly against the wall
and fasten with 8-32 x 1 5/8" screws (H). To ensure a water tight seal, apply a thin
bead of caulking around entire perimeter of the fixture.
6. Install light bulb.
To Install Glass (Figure 4)
Component Parts
A 8-32 x 1/4" Screw
B Top
Plate
C Glass
D Bracket
F Fixture
1. Slide glass (C) into fixture (F).
2. Slip top plate (B) onto fixture (F) until it rests on top of glass (C).
3. Slip 8-32 x 1/4" screw (A) through top plate (B) and thread into bracket (D) and
tighten. (Be careful not to over tighten)
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased
this product. We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
(Figure 3)
(Figure 4)