Hubbardton Forge 123307 - Manual (Page 3)

Assembly & Installation Instructions
A258
Semi-Flush Kirigami Four Light 12-3305 & 12-3307 Page 3 of 3
Hand-Forged, Vermont-Made Lighting and Accessories
154 Route 30 South, Castleton, Vermont 05735 24793 Rev D
To Install Bottom Assembly (Figure 5)
Component Parts
I Bottom Assembly
P Flat Head Screws (4)
Q Locking plate
1. Install light bulbs. Not Included
2. Raise bottom assembly (I) aligning flat
head screws with the larger holes in the
slots in the locking plate (Q).
3. Pushing up on the bottom assembly (I)
turn clockwise until the bottom assembly
stops in the locked position.
4. Restore electricity at main breaker.
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased
this product. We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
(Figure 4)
(Figure 5)