Hubbardton Forge 217635 - Manual (Page 2)

Glass Installation & Front Mounting Instructions
B57
For Gallery Sconce Models 21-7632 and 21-7635 Page 2 of 2
Component Parts
A Ball Head Screw (2)
B Fixture Can Assembly
C Fixture Front Panel
To Install Glass and Front Panel
1. Install light bulb (Fluorescent or G9).
Caution: Do not to touch G9 bulb with bare hands; oil from hands will reduce bulb life.
2. Mount ball head screw (A) in top and bottom of fixture can assembly (B). Only thread a couple of turns for each
screw.
3. Align slots on the top and bottom of fixture front panel (C) with the ball head screws previously installed into
fixture can assembly (B). Slide the fixture front panel (C) back until it fits against fixture can assembly (B).
4. Tighten both ball head screws (A) to secure fixture front panel (C).
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased
this product. We hope you enjoy your fixture!
Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735 17693 Rev B