Hubbardton Forge 217635 - Manual

Glass Installation & Front Mounting Instructions
B57
For Gallery Sconce Models 21-7632 and 21-7635 Page 1 of 2
Please refer to fixture installation instructions prior to glass installation.
Component Parts
A Fixture Front Panel
B Threaded Stud
C Glass
D Washer (2)
E Knurled Ball (2)
F Glass Clip
To Install Front Glass
1. Insert glass (C) into fixture front panel (A).
2. Slide the glass into glass clip (F) at bottom of fixture inside the panel.
3. Secure glass in position by placing washer (D) and knurled ball (E) onto threaded stud
(B). Be careful not to over tighten knurled ball causing glass to break.
Component Parts
A Glass Stop
B Threaded Stud
C Glass (2)
D Glass Clip (4)
E Hex Nut (4)
To Install Side Diffuser Glass
1. Install glass (C) into glass stop (A).
2. Install glass clips (D) and hex nut (E).
3. Slide glass clip (D) against glass (C) and tighten hex nut (E). Be
careful not to over tighten hex nut causing glass to break.
(continued)
Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735 17693 Rev B