Hubbardton Forge 204915 - Manual (Page 3)

Installation Instructions
B208
For Twilight Sconce 20-4915 Page 3 of 3
Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735 24453
To Install Fixture Front and Bulb (Figure 6)
Component Parts
A Fixture Front
B Thumb Screw (2)
C Fixture
Back
L Bulb (included)
1. Install light bulb (L). Be careful not to touch bulb
with bare hands; oil from the hands will
dramatically reduce bulb life.
2. Slip fixture front (A) over thumb screws (B)
aligning slots, lower onto fixture back (C).
3. Tighten thumb screws (B).
4. Restore electricity at the main breaker.
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased
this product. We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
(Figure 6)