Hubbardton Forge 204901 - Manual (Page 2)

Installation Instructions
B199
For Rook Sconce 20-4901 Page 2 of 2
Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735 24349
To Install Glass (Figure 4)
Component Parts
H Socket
I Bulb
(Included)
J Glass
K Retaining
Ring
L Socket Tool
M Spacer
1. Install light bulb (I). Be careful not to touch bulb with bare hands; oil
from the hands will dramatically reduce bulb life. Bulb is included.
2. Slip glass (J) and spacer (M) over socket (H). Note orientation of spacer.
Thread retaining ring (K) onto socket (H) using provided socket tool (L).
Be careful not to over tighten.
3. Restore electricity at main breaker.
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased
this product. We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
(Figure 4)