Hubbardton Forge 204320 - Manual (Page 3)

Installation Instructions
B272
Echo Sconce 204320 Page 3 of 3
Hand-Forged, Vermont-Made Lighting and Accessories
154 Route 30 South, Castleton, Vermont 05735 27786 A
To Install Glass (Figure 3)
Component Parts
K Socket
L
Bulb (Included)
M Glass
N Retaining Ring
O Retaining Ring Tool
1. Remove retaining ring (N) from socket (K). Retaining Rings are shipped
installed.
2. Install bulb (L). Be careful not to touch bulb with bare hands; oil from the hands
will dramatically reduce bulb life
3. Slip glass (M) over socket (K).
4. Thread retaining ring (N) onto socket (K) using provided retaining ring tool (O)
until it rests on inside of glass (M). Do not over tighten.
5. Restore electricity at main breaker.
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased
this product. We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
(Figure 3)