Hubbardton Forge 203030 - Manual (Page 3)

Installation Instructions
B210
Flora Sconce 20-3030 Page 3 of 3
Hand-Forged, Vermont-Made Lighting and Accessories
154 Route 30 South, Castleton, Vermont 05735 24581RevA
To Install Glass (Figure 3)
Component Parts
J Socket
K Bulb (included)
L Glass
M Retaining
Ring
N Socket Tool
1. Remove retaining ring (M) from socket (J). Retaining ring is shipped
installed.
2. Install light bulb (K). Be careful not to touch bulb with bare hands; oil
from the hands will dramatically reduce bulb life.
3. Slip glass (L) over socket (J) and thread retaining ring (M) onto the
socket (J) using provided socket tool (N).
4. Restore electricity at the main breaker. If installing shade option wait to
restore electricity until after shade is installed.
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased
this product. We hope you enjoy your fixture!
*
Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
(Figure 3)