Hubbardton Forge 19415612HG - Manual (Page 2)

Assembly & Installation Instructions
A238
For Ribbon Chandelier 19-415612HG Page 2 of 3 _
Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735 24409
To Install Single Glass Option
(Figure 2)
Component Parts
I Glass (12)
J Socket (12)
K Bulb (Included) (12)
L Spacer
(24)
M Retaining Ring (12)
1. Remove retaining rings (M) from sockets (J). Retaining rings are
shipped installed on sockets.
2. Install light bulbs (K). Be careful not to touch bulb with bare
hands; oil from the hands will dramatically reduce bulb life.
3. Slip glass (I) and spacers (L) over socket (J). Note orientation of
spacers.
4. Thread retaining ring (M) onto socket (J) until snug against spacer
(L). Be careful not to over tighten. Repeat steps 2 thru 4 for all
twelve arms.
5. Restore electricity at main breaker.
(continued)
(Figure 2)