Hubbardton Forge 19124810SG - Manual (Page 2)

If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased this product.
We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
H U B B A R D T O N F O R G E . C O M
hand-forged, vermont-made lighting and accessories
154 RT. 30 SOUTH • CASTLETON, VERMONT 05735
32320
Assembly & Installation Instructions
A382
For Aegis Chandelier 19124810SG Page 2 of 2
Install the Canopy (Continued)
CAUTION: MAKE SURE WIRE CONNECTORS ARE TWISTED ON
SECURELY, AND NO BARE WIRE IS EXPOSED.
7. Slide the canopy up the chain and over the threaded
loop (G), securing with loop collar (F). Make sure no wires
are pinched between the canopy (E) and the ceiling or
crossbar (A).
To Install Bowl Glass (Figure 2)
Component Parts
M Bulb Shield (10)
N Bulb (10)
O Glass (10)
P Socket (10)
1. Slip glass (O) over socket (P).
2. Install light bulb (N). Be careful not to touch bulb with bare
hands; oil from the hands will dramatically reduce bulb life.
3. Thread Bulb Shield (M) onto Socket (P) (be careful not to
over tighten). Future bulb changes may be accomplished
by snapping glass portion of barrier on and off rather than
unthreading the holder.
M
N
O
(Figure 2)
P