Hubbardton Forge 208226 - Manual (Page 2)

Installation Instructions
B46
Wall Sconces 203061, 203062, 203063 & 208226 Page 2 of 2
Hand-Forged, Vermont-Made Lighting and Accessories
154 Route 30 South, Castleton, Vermont 05735 16162 Rev B
To Install Opaque Glass (Figure 2)
Component Parts
E Retaining Ring
F Glass
G Socket
1. Remove retaining ring (E) from socket (G). Retaining Rings are shipped installed.
2. Place glass (F) over socket (G).
3. Replace retaining ring (E) and tighten to secure glass. Do not over-tighten.
4. Install light bulbs.
5. Restore electricity at the main breaker.
To Install Water Glass (Figures 3 & 4)
Component Parts
E Retaining Ring
F Glass
G Socket
H Decorative Ring Cover
1. Remove retaining ring (E) from socket (G). Retaining Rings are shipped installed.
2. Install retaining ring (E) into decorative ring cover (H). If retaining ring (E) fits to
loose bend a few inside tabs of the decorative ring cover (H) (Figure 4).
3. Place glass (F) over socket (G).
4. Replace retaining ring (E) and tighten to secure glass. Do not over-tighten.
5. Install light bulb.
6. Restore electricity at the main breaker.
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased
this product. We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
Figure 2
Figure 3
Figure 4