Hubbardton Forge 18810 - Manual (Page 3)

Assembly & Installation Instructions
A96
Formed Glass Pendant Page 3 of 3
Install Glass (Figure 5)
Component Parts
O Metal Clip (3)
P Glass
(3)
Q Fixture
R Bulb
S Protective
Barrier
1. Attach glass clip (O) into notches on fixture (Q).
2. Slide glass (P) into slots in fixture (Q).
3. Align the glass (P) until it protrudes equal amounts on both sides of
fixture.
4. Install light bulb (R). Be careful not to touch bulb with bare hands.
Oil from the hands will dramatically reduce bulb life.
5. Thread protective barrier (S) onto Socket. Future bulb changes may
be accomplished by snapping glass portion of barrier on and off
rather than unthreading the holder.
(Figure 5)
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased
this product. We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735 19500