Hubbardton Forge 18497 - Manual (Page 2)

Assembly & Installation Instructions
A289
For Staccato Pendant 18-497 Page 2 of 2
Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735 26777
To Install Metal Shade & Glass
(Figure 3)
Component Parts
K Retaining Ring
L Glass
M Metal
Shade
N Socket
O Retaining Ring Tool
1. Remove retaining ring (K) from socket (N) and retain for later use.
Retaining Ring is shipped installed.
2. Place metal shade (M) over glass (L) and then place glass (L) over
socket (N).
3. Thread retaining ring (K) onto socket (N) and tighten using
retaining ring tool (O) until snug against glass (L). Do not over-
tighten.
4. Install light bulb (not included).
5. Restore electricity at the main breaker.
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased
this product. We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
(Figure 3)