Hubbardton Forge 138585 - Manual (Page 3)

Assembly & Installation Instructions
A257
For Aura Pendant 13-8585 Page 3 of 3
Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735 24787
Install Bulb (Figure 7)
Component Parts
Q Flat Head Screw (6)
R Bulb Cover Assembly (6)
S Bulb (supplied) (6)
T Socket
(9)
1. Loosen flat head screw (Q) and slip bulb cover
assembly (R) from fixture.
2. Install bulb (S) (supplied). Be careful not to touch
bulb with bare hands; oil from the hands will
dramatically reduce bulb life.
3. Install bulb cover assembly (R) and tighten flat head
screw (Q).
4. Repeat steps for all six bulb locations.
Install Glass (Figure 8)
Component Parts
U Glass (6)
1. Slip glass (U) into slots in fixture between bulb locations.
2. Repeat for all six locations.
3. Restore electricity at the main breaker.
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased
this product. We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
(Figure 7)
(Figure 8)