Hubbardton Forge 137860 - Manual

Assembly & Installation Instructions
A108
After Hours Pendant 13-7860F Page 1 of 3
Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735 19820 Rev B
To Assemble Pipe to Fixture (Figure 1)
Component Parts
A Fixture Pipe
B Fixture
1. Carefully unpack the fixture from the carton.
2. Carefully thread fixture pipe (A), threaded end first, over fixture wires.
3. Apply a drop of the supplied thread locking compound to the internal threads at the top of the
fixture (B) and screw stem into fixture, being careful not to twist the wires.
Note: Application of the thread locking compound is necessary to prevent the stem from
loosening during regular maintenance and cleaning of the fixture. Be certain to apply the
compound.
4. See instructions on next page to complete the installation.
(continued)
(Figure 1)