Hubbardton Forge 137581 - Manual (Page 3)

Installation Instructions
A91
Large Bent Plane Pendant Page 3 of 3
Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735 19403
To Install Glass (Figure 5)
Component Parts
A Tab
B Screw
(2)
C Glass
1. Angle glass (C) through bottom of
fixture up over tab (A) on right side
until it comes to a stop.
2. Raise other end of glass (C) until it
clears left tab.
3. Lower into place and center
between tabs.
4. Install screw (B) in side of fixture
(A) enough to keep glass from
rising. Repeat on other side.
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased
this product. We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
(Figure 5)