Hubbardton Forge 137570 - Manual (Page 4)

If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased this product.
We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
H U B B A R D T O N F O R G E . C O M
hand-forged, vermont-made lighting and accessories
154 RT. 30 SOUTH • CASTLETON, VERMONT 05735
All designs and images ©1989-2013 Hubbardton Forge ® . All rights reserved.
27845 Rev B
Assembly & Installation Instructions
D
E
F
H
(Figure 6)
To Install Double Glass Option (Figure 5)
Component Parts
M Socket (6)
N Bulb (6-included)
O Double Glass (6)
P Metal Tube (6
1. Install light bulb (N). Be careful not to touch bulb with bare
hands; oil from the hands will dramatically reduce bulb life.
Note: The bulb included is based on our design preference; see
the fixture wattage sticker for Max wattage information.
2. Carefully lower the metal tube (P) around the inner tube of
the glass (O) until it rests on the bottom.
3. Install glass (O) by rotating it clockwise while holding the
fixture assembly until it rests against the fixture. Do not over
tighten.
4. Repeat steps 1-3 for remaining sockets.
5. Restore electricity at main breaker.
To Install Short Glass Option (Figure 6)
Component Parts
M Socket (6)
N Bulb (6-included)
Q Short Glass (6)
R Retaining Ring (6)
S Retaining Ring Tool
1. Install light bulb (N). Be careful not to touch bulb with bare
hands; oil from the hands will dramatically reduce bulb life.
Note: The bulb included is based on our design preference; see
the fixture wattage sticker for Max wattage information.on.
2. Slip glass (Q) over socket. Thread retaining ring (R) onto
socket (M) using the provided retaining ring tool (S).
3. Repeat steps 1 & 2 for remaining sockets.
4. Restore electricity at main breaker.
A318
Eddy Pendant 137570 Page 4 of 4
R
Q
N
M
S
(Figure 5)
P
N
O
M