Hubbardton Forge 136405 - Manual (Page 3)

Installation Instructions
A243
For Axis Pendants 13-6405 & 13-6405F Page 3 of 3
Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735 24571
To Install Bulbs and Bottom Assembly (Figure 5)
Component Parts
G Upper Assembly
L Lower Assembly
P Locking Tabs (3)
Q Set
Screw
1. Install light bulbs. “F” version bulbs are included.
2. Tighten set screw (Q) to prevent fixture from turning.
3. Raise lower assembly (L) with glass installed so vertical
bars pass through openings in the upper assembly (G).
4. Turn lower assembly (L) until it stops in the locked
position.
5. Slip locking tabs (P) on the three uprights and lower until
they rest on top for fixture.
To Install Diffusers (Figure 6)
Component Parts
R Diffuser (3)
S Knobs (6)
T Studs (6)
1. Slip diffuser (R) onto studs (T).
2. Thread knobs (S) onto studs (T) and tighten.
3. Repeat for all three diffusers.
4. Restore electricity at main breaker.
If you need further assistance, or find that you are missing any parts,
please contact the dealer from which you purchased this product. We
hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
(Figure 5)
(Figure 6)