Hubbardton Forge 133305 - Manual (Page 4)

Assembly & Installation Instructions
A248
Kirigami Four-Light Pendant 13-3305 Page 4 of 4
Hand-Forged, Vermont-Made Lighting and Accessories
154 Route 30 South, Castleton, Vermont 05735 24618 Rev A
To Install Bottom Assembly
(Figure 7)
Component Parts
O Bottom Assembly
V Flat Head Screws (4)
W Locking
plate
1. Raise bottom assembly (O)
aligning flat head screws
with the larger holes in the
slots in the locking
plate (W).
2. Pushing up on the bottom
assembly (O) turn clockwise
until the bottom assembly
stops in the locked position.
3. Install light bulbs. Not
Included
4. Restore electricity at main breaker.
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased
this product. We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
(Figure 7)
(Figure 6)