Hubbardton Forge 132125 - Manual (Page 3)

Assembly & Installation Instructions
A207
Prairie Pendant Three Light 13-2125 & 13-2125F Page 3 of 3
Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735 22802
To Install Glass (Figure 4)
Component Parts
O Retaining Ring (6)
P Glass
(3)
Q Socket (3)
1. Remove retaining rings (O) from socket (Q). Retaining Rings
are shipped installed.
2. Place glass (P) over socket (Q).
3. Thread the first retaining ring (O) onto socket until it is against
top of the glass (P).
4. Thread the second retaining ring (O) onto socket until it is snug
against the first retaining ring. Do not over tighten.
5. Install light bulb. (Fluorescent bulbs included with fixture.)
6. Restore electricity at the main breaker.
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased
this product. We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
(Figure 4)