Hubbardton Forge 131234 - Manual (Page 3)

Installation Instructions
A78
For Almost Infinity Pendant with Duet Shades 13-1224 & 13-1234 Page 3of 3
Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735 19390
To Install Glass Diffusers & Shades (Figure 4)
Component Parts
K Shade Clip (6)
L Shade Spider (2)
M Glass
(2)
N Shade (2)
1. Attach the (3) shade clips (K) to shade spider (L) leaving clearance for the edge of the glass (M). Shade clip
should push onto first curved area of spider (L).
2. Place shade (N) so that shade spider (L) rests on top edge of glass (M).
3. Slide shade clips (K) out towards edge of glass (M) equally to center the shade (N). Slide clips until the notch
engages with the top edge of the glass.
4. Repeat with other shade.
5. Restore electricity at main breaker box.
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased
this product. We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
(Figure 4)