B257, Installation instructions – Hubbardton Forge 207673 User Manual

Page 2

If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased this product.
We hope you enjoy your fixture!

* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.

H U B B A R D T O N F O R G E . C O M

hand-forged, vermont-made lighting and accessories

154 RT. 30 SOUTH

•

CASTLETON, VERMONT 05735

27016 Rev A

Installation Instructions

To Mount Fixture to Wall with Standard 4” Box

(Figure 1)

(Continued)

5. See instructions following to install glass.

To Install Glass

(Figure 2)

Component Parts

F Washer

G Rubber o-ring

H Knurled Ball

I Threaded Stud

J G9 Socket

K Bulb (Included)

L Glass

1. Install light bulb (K). Be careful not to touch bulb with bare

hands; oil from the hands will dramatically reduce bulb life.
Install light bulb (not included).

Note: The bulb included is based on our design preference; see

the fixtures wattage sticker for Max wattage information.

2. Unscrew knurled ball (H) from threaded stud (I) and remove

washer and o-ring (F & G).

3. Slip glass (J) over socket (J) such that the threaded stud (I)

aligns with the small hole in the glass (J).

4. Slide washer (F) over threaded stud followed by o-ring

(G). Thread knurled ball (F) to threaded stud (I) until the

glass is tight to the fixture.

Note: The glass is mouth blown and slight variations in thickness

are normal. Washer may not be required if glass thickness makes it
difficult to thread knurled ball.

5. Restore electricity at the main breaker.

B257

Brindille Glass Sconce 207670L, 207670R, 207673L & 207673R

Page 2 of 2

(Figure 2)

This manual is related to the following products:

207670