B287, Installation instructions – Hubbardton Forge 206540 User Manual

Page 2

If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased this product.
We hope you enjoy your fixture!

* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.

H U B B A R D T O N F O R G E . C O M

hand-forged, vermont-made lighting and accessories

154 RT. 30 SOUTH

•

CASTLETON, VERMONT 05735

28806 Rev A

Installation Instructions

To Mount Fixture to Wall

(Figure 1)

(Continued)

5. Carefully tuck all wires behind the fixture assembly and

inside the wall mount bracket and place the fixture firmly

onto bracket (B) and fasten with #8 black screws (E) on top.

6. Install two remaining black screws (E) in bottom of fixture

attaching to wall mounting bracket (B).

To Install Glass

(Figures 2-4)

Component Parts

A Fixture Assembly

H Round Block

I Glass

J Rubber Washer

K #8 Screw

L Thumb Screw

M Socket

N Metal washer

1. Remove round block (H) along with rubber & metal washers

(J&N), #8 screw (K) and thumb screw (L). Round block and

hardware are shipped installed (Figure 2).

2. Attach glass (I) to round block (H) using #8 screw (K), rubber

washer (J), and metal washer (N). (Figure 3).

Note: Be sure not to over tighten the screw.

3. Thread bulb (not included) into socket (M).

4. Tilt glass (I) over bulb and fasten round block (H) to fixture

assembly (A) using the thumb screw (L) (Figure 4).

5. Restore electricity at main breaker.

B287

Pluto Sconce 206540; Vintage Platinum

Page 2 of 2

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH AND
PROPERTY DAMAGE. We recommend installation by a licensed electrician. This product must be installed in accordance with
applicable installation code(s), by a person familiar with the construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 2)

(Figure 3)

(Figure 4)

J
N