B312, Assembly & installation instructions – Hubbardton Forge 206101 User Manual

Page 2

If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased this product.
We hope you enjoy your fixture!

* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.

H U B B A R D T O N F O R G E . C O M

hand-forged, vermont-made lighting and accessories

154 RT. 30 SOUTH

•

CASTLETON, VERMONT 05735

30648

Assembly & Installation Instructions

To Mount Fixture to Wall

(Figures 1 & 2)

(Continued)

8. Hold the fixture (B) close to the mounting bracket (C) and

using suitable wire connectors (not provided) connect fixture

wires to supply wires (white to white and black to

black). Run a pigtail lead from the ground screw (G) and

cupped washer (F) to the electrical box and connect all

ground wires (bare copper or green to bare copper or

green).

CAUTION: MAKE SURE WIRE CONNECTORS ARE TWISTED ON
SECURELY, AND NO BARE WIRES ARE EXPOSED.

9. Carefully tuck all wires behind the fixture (B) and inside the

mounting bracket (C) and place the fixture firmly onto bracket

10. Install two remaining black screws (H) in bottom of fixture (B)

attaching to mounting bracket (C).

To Complete Fixture Install

(Figure 3)

Component Parts

A Front Assembly

B Fixture

I Socket

J Bulb (Included)

K Glass Shield

1. Install bulb (J) into socket (I). Be careful not to touch bulb

with bare hands; oil from the hands will dramatically

reduce bulb life.

2. Thread glass shield (K) onto socket (I).

3. Making sure that the stud on the front assembly (A) is on top,

press the front assembly (A) onto the fixture (B). Front

assembly (A) should snap into place on the top.

4. Restore electricity at main breaker

B312

Flux Sconce Vintage Platinum 206101

Page 2 of 2

(Figure 3)

STUD