Hubbardton Forge 161025T - Manual (Page 3)

H U B B A R D T O N F O R G E . C O M
hand-forged, vermont-made lighting and accessories
154 RT. 30 SOUTH • CASTLETON, VERMONT 05735
30426 Rev A
Installation Instructions
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased this product.
We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
A350
Airis Low Voltage Pendants 161020T & 161025T Page 3 of 5
(Figure 6)
A
B
C
CAUTION: INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY. IMPORTANT SAFETY INSTRUCTIONS. LIGHTED LAMP IS HOT!
WARNING – To reduce the risk of FIRE OR INJURY: Turn off power and allow to cool before replacing lamp. Lamp gets HOT quickly!
Contact only switch/plug when turning on. Do not touch the lamp at any time. Do not touch hot lens, guard, or enclosure. Keep lamp
away from materials that may burn. Use a soft cloth. Oil from skin may damage lamp. Do not operate the luminaire with a missing or
damaged shield.
SAVE THESE INSTRUCTIONS
(Continued)
To Install Bulb & Complete Assembly (Figure 6)
Component Parts
A 8-32 Screw (2)
B Top Assembly
C Bottom Assembly
1. Install light bulb (not included).
CAUTION: TO REDUCE THE RISK OF FIRE DO NOT USE A LAMP
IDENTIFIED FOR USE IN ENCLOSED LUMINAIRES.
2. Install 8-32 screws (A) through top assembly (B) and thread
into bottom assembly (C). To replace bulb the two 8-32 (A)
screws are removed to separate bottom assembly from top
assembly.
3. Restore electricity at main breaker.
(Figure 3)