Hubbardton Forge 161025T - Manual (Page 2)

If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased this product.
We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
H U B B A R D T O N F O R G E . C O M
hand-forged, vermont-made lighting and accessories
154 RT. 30 SOUTH • CASTLETON, VERMONT 05735
30426 Rev A
Installation Instructions
To Assemble Glass or Screen Option (Figures 2, 3 & 4)
Component Parts
C Bottom Assembly
K Tube Assembly
L 6-32 Screws (4)
M Screen
1. Remove 2 screws (A) and separate top assembly from
bottom assembly. Save them aside, do not discard.
2. Remove tube assembly (K) from bottom assembly (C) by
removing four 6-32 screws (L) and separating tube
assembly (K) from retainer (O). Set all parts to the side
for later use (Figure 6).3. Remove flat head screws (P) from
tube assembly (K) and set aside for later use.
3. Thread screws (P) through either screen (M) or glass tube (N)
depending on option purchased and into tube assembly (K).
4. Tighten the three screws (P) equally into tube assembly so
that screen or glass is centered.
To Re-Assemble Bottom (Figure 5)
Component Parts
C Bottom Assembly
K Tube Assembly
L 6-32 Screws (4)
O Retainer
1. Slip 6-32 screws (L) through retainer (O) and bottom
assembly (C). Thread screws (L) into tube assembly (K) and
tighten with supplied Allen wrench.
A350
Airis Low Voltage Pendants 161020T & 161025T Page 2 of 5
S
(Figure 4)
P
K
N
K
P
M
(Figure 5)
L
O
C
K
SCREEN OPTION
SCREEN OPTION
(Continued)
N Glass Tube
O Retainer
P Flat Head Screws (3)
(Figure 2)
D
A
B
C
N
GLASS OPTION
(Figure 3)