Allied Telesis AT-MCM02 - Manual (Page 34)

24
SET LOADER Command
This command downloads a new version of the software onto the media
converter. It is required that your network has a TFTP server and that you
have downloaded the new software to the server.
Format:
SET LOADER FILE=filename SERVER=IPaddress
Variables:
filename: Specifies the path and filename of the file containing the media
converter software. The default filename is atmcm02.bin.
IPaddress: Specifies the IP address of the network server or workstation
containing the new software.
Example:
In the following example, the filename of the software is atmcm02.bin and
the IP address of the network device containing the software is
192.11.11.12:
SET LOADER FILE=atmcm02.bin SERVER=192.11.11.12
Note
You must perform the RESTART REBOOT command immediately after
you download a new version of the software. The command is described
on page 25.
SHOW LOADER Command
This command displays information used in downloading a new version of the
operating software onto a media converter. The information includes:
❑
The method by which the new software will be downloaded onto the
media converter.
❑
The filename of the software.
❑
The destination of the software, which is always flash ROM.
❑ The IP address of the network device containing the new software.