Allied Telesis AT-MCM02 - Manual (Page 23)

13
Chapter 4
Managing a Multichannel Media Converter
After installing an AT-MCM02 Management Module, you can manage an
AT-MCF Series Media Converter in one of three ways. They are:
❑
RS-232 Port
❑ Telnet Program
❑
SNMP Management Program
RS-232 Port
You can manage the media converter through the RS-232 port by connecting
to a terminal or a PC with a terminal emulation program using the control
cable. Configure the terminal or terminal emulation program to the following
settings:
❑
Baud rate: 38400
❑ Parity: None
❑
Start bits: 1
❑
Stop bits: 1
❑ Flow control: none
❑
Emulator: VT100
To start a management session, you must login. The login name is manager
and the password is ati. (The login name and password are case sensitive.)
Once you have logged in, the “>” command prompt is displayed. For
information on the commands, refer to the section “Management Commands”
on page 15.