Allied Telesis AT-MCM02 - Manual (Page 28)

18
Examples:
The following example assigns the media converter the name of
“MC112Sales,” and gives its location and contact as “BuildingFour” and
“JohnSmith,” respectively.
SET SYSTEM NAME=”MC112Sales” LOCATION=”BuildingFour”
CONTACT=”JohnSmith”
You can also set the information individually. The following example sets
just the location variable:
SET SYSTEM LOCATION=”FifthFloor”
SHOW SYSTEM Command
This command displays the name, location, and contact of the media
converter.
Format:
SHOW SYSTEM
SNMP Commands
The AT-MCM02 management module provides several commands for setting
and displaying the SNMP community strings on the media converter. The
commands are:
❑ SET SNMP COMMUNITY
❑ SET SNMP MANAGER
❑
SHOW SNMP
SET SNMP COMMUNITY Command
This command is used to set the Set, Get, and Trap community strings on the
media converter.
Format:
SET SNMP COMMUNITY SET=SetString GET=GetString
TRAP=TrapString