Allied Telesis AT-MCM02 User Manual

Page 20

Once the terminal parameters have been set and after a delay of
approximately 10 seconds, the following menu is displayed.

Caution
The ‘Type any key for Boot Menu’ prompt is for manufacturing purposes
only.

Select the Login field and in lowercase letters, enter: manager. (This
field is case sensitive.)

Press .

A prompt is displayed for the password.

In lowercase letters, enter: ati. (The password is case sensitive.)

Press .

The ‘>’ prompt is displayed.

Use the SET IP INTERFACE command to configure the IP parameters
for the management module. The format of the command is as follows:

SET IP INTERFACE=eth0 IPADDRESS=IPAddress MASK=SubnetMask
GATEWAY=GatewayAddress

For example, if you wanted to set the management module to an IP address
of 192.168.1.2, a subnet mask of 255.255.255.0, and a gateway address of
192.168.1.1, the command would be:

SET IP INTERFACE=eth0 IPADDRESS=192.168.1.2
MASK=255.255.255.0 GATEWAY=192.168.1.1

Boot MCM02

Version: 1.3.2

16-May-2001

----------------------------------------------------

Type any key for Boot Menu’

Initialization .....

Loading Program .....

----------------------------------------------------

MCM02 - Connected To: MCF 112

Version: 2.0.6 31-July-2001

----------------------------------------------------