2 reopen, 3 close, 4 property – Allied Telesis AT-VIEW PLUS 3.2 DEVICE MANAGER User Manual

Page 39: 5 exit, 2 reopen 5.1.3 close, Reopen, Close, Property, Exit

Allied Telesyn

AT-VIEW PLUS

DEVICE MANAGER

Current status

Indicates whether or not AT-View Plus Device Manager is currently connected to a target
device and whether or not Trap operations are currently enabled.

5.1.2 Reopen

This command can be used to reconnect to a recently accessed device.

5.1.3 Close

Closes the SNMP session with the device and closes the Panel window. To connect to another
device, select File > Open.

5.1.4 Property

Change parameters for communicating with the device. The dialog box is identical to the Select
Target Host dialog box used to open a connection. For information on the settings that can be
modified or viewed from this dialog box, see section

5.1.1

5.1.5 Exit

Terminates connection to the target device and closes the AT-View Plus Device Manager
application.

5 Common Menus

PN 613-50664-00 Rev C

Page 39 of 119