Allied Telesis AT-VIEW PLUS 3.2 DEVICE MANAGER - Manual (Page 11)

Allied Telesyn AT-VIEW PLUS
DEVICE MANAGER
Examples:
devicemanager -TargetHost 172.16.99.123 -SnmpVersion 1
devicemanager -TargetHost 172.16.99.123 -SnmpVersion 2
2.1.4 Get Community
Get Community is an SNMP community string used to get MIB values from the agent. You must
specify the same community string as the one configured on the target host. If the string is not
specified, the default community string "public" is used.
Examples:
devicemanager -TargetHost 172.16.99.123 -GetCommunity getdvcmgr
devicemanager -TargetHost dvcmgrhub -GetCommunity getdvcmgr
2.1.5 Set Community
Set Community is an SNMP community string used to change values of the agents' MIB
variables. You must specify the same community string as the one configured on the target host.
If the string is not specified, default community string "private" is used.
Examples:
devicemanager -TargetHost 172.16.99.123 -SetCommunity setdvcmgr
devicemanager -TargetHost dvcmgrhub -SetCommunity setdvcmgr
2.1.6 Trap Community
Trap Community is an SNMP community string used to receive traps from the agent. You must
specify the same community string as the one configured on the target host. If the string is not
specified, the default community string "public" is used. If the Trap Community is explicitly
defined, the trap will be enabled automatically.
Example:
devicemanager -TargetHost dvcmgrhub -TrapCommunity trapdvcmgr
PN 613-50664-00 Rev C Page 11 of 119